I am creating a form for my company in our effort to go paperless and to do all forms or paperwork in a tablet. One way we are trying to accomplish this is by scanning barcodes into LiveCycle to populate tables with certain information that has been stored in the barcode using a barcode scanner. My question is whether this is possible or not, and if it is possible, how to do so?
Any information or advice would be welcomed and greatly appreciated.
Thanks!
Hello! Friends,
I have designed an adobe form using Livecycle ES3. The objective is to generate bar code after completing the form. Bar code gets generated in Livecycle.
But in Adobe Reader the bar code is generated only when the data is less. When the data is more then instead of bar code a grey bar is shown.
There are about 25 fields in the form. Tried this in Adobe Reader X (also tried in 9 & 8).
Any help/suggestion in this is highly appreciated.
Thanks in advance
Hi,
I'm using the adobe livecycle addon for the SAP GUI. I need to generate a datamatrix that contains a group separator character.
This is a machine control character so you cannot enter it in the value field.
Is there a way to have group separators in a datamatrix?
Or does adobe provides a GS1 datamatrix?
Kind regards,
Dider
Hi gurus,
I'm trying to create QR code bigger. I mean not with amount of data, but enlarge it. That I'll be able to read it with barcode reader from bigger distance.
I'm using LiveCycle ES2.
Any guesss?
THanks for any answer.
How do I add attributes to a Barcode in LiveCycle? In other words, how do input that I want the barcode to take info from a couple required fields?
Thank you!
1. I would appreciate if anyone could provide me with a sample barcoded form created using LiveCycle Designer ES.
2. Once the barcoded form is distributed, completed and returned to the author, how do I decode the barcode using a hand-held scanner to gather the data in the barcode into the Response file.
Thank you.
I have this same question in LiveCycle Design, but found it would be best here.
I have Adobe Acrobat 9 pro and was trying to create GS1 DataBar Expanded barcodes.
Since I was limited to just 3 barcode types I hit the forum and found out about LiveCycle.
Even in LiveCycle through Adobe Acrobat 9, I don't see the GS1 barcode I need.
I've tried to manipulate what is available, but that will not work.
I found a plug-in for Adobe Illustrator that has the GS1 DataBar Barcode, but Illustrator + the plug-in software is a little expensive.
My question as stated in the beginning is can you create GS1 DataBar Expanded barcode through Acrobat?
In this situation through LiveCycle? Is there a plug-in through Acrobat or LiveCycle that will include the GS1 DataBar barcode?
I have a date field that is mapped to a barcode. the date field has a pattern > Data of date {YYYYMMDD} because the target system requires it without the dashes. 
However when the barcode generates it always encodes YYYY-MM-DD (ie. WITH THE DASHES).
If i do a xfa.host.messageBox (this.rawValue) it always displays the YYYY-MM-DD.
If I call the this.formattedValue it does return YYYYMMDD.
To fix this i created a hidden field which i wrote to on the exit of the datefield and mapped this hidden field to the barcode.
hiddenField.rawValue = this.formattedValue
Is there a better way to do this without the hidden fields? I ask since i have a bunch of date fields..
How/where do i change the pre-generated barcode code to grab the formattedValue instead of the rawValue if its a datetimefield?
I am filling a .pdf form from a aspx web page using iTextSharp. I created the .pdf using LiveCycle. The form contains a code 3 of 9 barcode that can be anywhere from 6 to 22 digits. The .pdf gets printed to a 4x6 label. The users are reporting that sometimes their scanner will read the barcode and sometimes it will not. The only difference I can see between barcodes is the length.
The barcode is 2.8 inch long. I have the data length set to 22(it can be 6-22 digits long), checksum is auto, and ratio is 2.2. It's a read only field and default is 0. Are these setting incorrect? I have tried different length, defaults, etc but no luck. Does adobe have some best practices for 3 of 9 bar codes?
Any advice or information would be greatly appreciated.
Thanks,
Mike
Trying to make a form with Livecycle but cant see a type that has more than 10 numbers code data would be 4062PARS1234567 how can I make this happen thanks for any help on this PS not an IP type just a truck driver trying to make my Border crossing easier
Hello ,
I have a lifecycle designer 8.1 on windows 7 machine, my requirement is to place the UPC-A barcode without the human readable number underneath the bars and with the interspacing between the bars as 0.020.
Is the above requirement feasible and possible, please provide your inputs .
Thanks in advance.
Pooja
Hi,
As I develop my form in LiveCycle designer, I'm setting a drop down list in the form. As seen on the tutorials we have to input the data to for the drop down list one by one.
Can the list be imported from an excel file to make it easier?
Thank you
-Raja-
i am looking at buying a ADO livecycle barcoded forms and decoder license. Any idea how do i buy it?
I have a form that has a number of fields that need to be filled out. When this is complete, the user should digitally sign (with a certificate) the form. However, due to legal requirements, the form must then be printed and mailed back to the organization. Is it possible to encode the signature data within the barcode (PDF417) so it can be validated?
I already created form in PDF file which is validate completely .But , I required generate a barcode of all field of form using custom script on button click event.
Please give me right way for doing it .
Thanks in Advance,
Jaydeep Solanki.
Dear All,
I have created sample pdf with barcode using of adobe live cycle designer.All field value stored in the barcode.
Now I have barcode, from that i wan't to fetch xml data.
How can I achive this functionality?
Thanks & Regards
Jaydeep
I have a Paper Form Barcode
Symbology: QR Code
Scaning Method: Custom
Error correction level: M
Modul width:0.592 mm
Character Encoding: UTF-8
But sometime QR code decode data not equal original data
Case 1:
PaperFormsBarcode1.rawValue = "哈哈";
After decode: I got "哈哈" ==> OK
Case 2:
PaperFormsBarcode1.rawValue = "哈|哈哈|"
After decoe: I got "蜩�蜩亥嶋|" ==> Error!!!
Case 3:
PaperFormsBarcode1.rawValue = "A|哈哈|"
After decode: I got "A|哈哈|" ==> OK
Decoder:
I tried several Android / iOS APP on several cellphones, and they ALL got same result.
Our client (Bank) bought Adobe Livecycle ES4 Soluction, and we need your help very much, thank you!
Hi,
We really need to add a GS1-128 barcode but I can't find this object to "insert". Does anyone else out there have a similar need? And if so, how have you then solved this issue with using GS1-128 barcodes?
I have a form that will be scanned and I need the pdf417 barcode to automatically generate the Page 1 of 12 or whatever the count will be. I have tried using global data with the "Pages" text but that hasn't worked. You can't make a Collection list with the floating fields of CurrentPage and PageCount so could someone please offer a suggestion as to how to accomplish this.
My form has two master pages so I have one of those barcodes on each page. Right now I'm just entering that information manually in the value field but I'm afraid I'll always forget to enter that information.
Thanks for any help that can be offered.
We can't get the USB token to be recognized by the barcode decoder service. Is there an update for barcoded forms 7.0 ST that provides support for Windows 7 or Server 2008?
Thank you